/
Configuring IPECS Report Plus - Configure Trunks

Configuring IPECS Report Plus - Configure Trunks

Owned by awimalasatya
Last updated: Mar 04, 2021 by spoudel (Deactivated)

Access this screen from the IPECS Report Plus Manager  Site Configuration  Configure Trunks, click here on running IPECS Report Plus Manager.

The parameters of the trunks at a site, along with the trunk groups, can be edited.  The ‘Trunks’ grid displays a list of all the trunks at this site.  This list is automatically populated as calls are logged.

If IPECS Report Plus Server logs a call that uses a trunk not listed for a site, it will add that trunk to the list of trunks for the site, with a carrier of Use Group and a Trunk Group of the first trunk group for that site. Trunks can also be added manually for a site.  To add a trunk, click the ‘Add’ button at the base of the list.

A range of trunks can also be added by clicking ‘Add Range’ button instead.

Added trunks can be deleted by clicking the ‘red bin’ icon   on the left of the trunk’s name. Any modifications to each trunk can still be made by clicking on the cell to be edited.

A set of preconfigured trunks can be imported from a CSV (comma-separated value) file by clicking the ‘Import’ button.  A standard file explorer will be shown to select the CSV file. The CSV file must be formatted as in three columns: Trunk Number, Carrier Name, Trunk Group Name.

A trunk group can be added to the list by clicking the ‘Add’ button. A trunk group can be deleted by clicking the ‘red bin’ icon  on the left of the trunk group’s name.  At least one trunk group must always be present and so the first trunk group cannot be deleted.

The Charge Outbox must always be checked unless outgoing calls using trunks on this trunk group should be charged to zero. Calculation using Meter Pulses can also be enabled on the trunk group.


End of article.